Uploaded clips featuring ytterbium

Amp
Cab
Speaker
Mic
Guitar
Pickups
Posted on
Warning: strtotime() [function.strtotime]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Chicago' for 'CDT/-5.0/DST' instead in /home/tonefind/public_html/index.php on line 352

Warning: strtotime() [function.strtotime]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Chicago' for 'CDT/-5.0/DST' instead in /home/tonefind/public_html/index.php on line 352

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Chicago' for 'CDT/-5.0/DST' instead in /home/tonefind/public_html/index.php on line 352

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Chicago' for 'CDT/-5.0/DST' instead in /home/tonefind/public_html/index.php on line 352
Jul 6, 2009
Owner's Notes
Preamp is a mixture of a JCM800 and a 5E3.
First valve is 2 cascaded stage with a "low" input in between, like a JCM800, 2nd valve is exactly as a 5E3.
Power amp is a pair of 6K6GT, cathode biased, 268V, for about 8W or push-pull pentode power!
SS-Rectified.
Still some bugs to iron out, fairly noisy, but it's a prototype built on perf-board! Not bad eh?
Recording was the amp slaved to a dummy load, then DI'ed into a Mackie ONYX400F, Voxengo Boogex is used for cab sim.
Posted on
Warning: strtotime() [function.strtotime]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Chicago' for 'CDT/-5.0/DST' instead in /home/tonefind/public_html/index.php on line 352

Warning: strtotime() [function.strtotime]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Chicago' for 'CDT/-5.0/DST' instead in /home/tonefind/public_html/index.php on line 352

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Chicago' for 'CDT/-5.0/DST' instead in /home/tonefind/public_html/index.php on line 352

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Chicago' for 'CDT/-5.0/DST' instead in /home/tonefind/public_html/index.php on line 352
Apr 28, 2009
Owner's Notes
Look for the "ShagBolt 50" thread on HCAF
This is a layering of the different modes, with a clean part and a quickly put together lead.

I definitely need to find better matching speakers, the G12T are choking the tone of this marvelous amp!
Posted on
Warning: strtotime() [function.strtotime]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Chicago' for 'CDT/-5.0/DST' instead in /home/tonefind/public_html/index.php on line 352

Warning: strtotime() [function.strtotime]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Chicago' for 'CDT/-5.0/DST' instead in /home/tonefind/public_html/index.php on line 352

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Chicago' for 'CDT/-5.0/DST' instead in /home/tonefind/public_html/index.php on line 352

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Chicago' for 'CDT/-5.0/DST' instead in /home/tonefind/public_html/index.php on line 352
Apr 28, 2009
Owner's Notes
The amp is a home-built Marshall 50w clone
This is the "Plexi" mode, which means jumpered channels. The pre-PI MV is 100% on, I'm using the PPIMV to bring the volume down instead.
The filtering on the preamp tubes is as per Plexi 1987 Lead specs.
Look for the "ShagBolt 50" thread on HCAF

This clip adds a boost pedal
Posted on
Warning: strtotime() [function.strtotime]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Chicago' for 'CDT/-5.0/DST' instead in /home/tonefind/public_html/index.php on line 352

Warning: strtotime() [function.strtotime]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Chicago' for 'CDT/-5.0/DST' instead in /home/tonefind/public_html/index.php on line 352

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Chicago' for 'CDT/-5.0/DST' instead in /home/tonefind/public_html/index.php on line 352

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Chicago' for 'CDT/-5.0/DST' instead in /home/tonefind/public_html/index.php on line 352
Apr 28, 2009
Owner's Notes
The amp is a home-built Marshall 50w clone
This is the "Plexi" mode, which means jumpered channels. The pre-PI MV is 100% on, I'm using the PPIMV to bring the volume down instead.
The filtering on the preamp tubes is as per Plexi 1987 Lead specs.
Look for the "ShagBolt 50" thread on HCAF
Posted on
Warning: strtotime() [function.strtotime]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Chicago' for 'CDT/-5.0/DST' instead in /home/tonefind/public_html/index.php on line 352

Warning: strtotime() [function.strtotime]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Chicago' for 'CDT/-5.0/DST' instead in /home/tonefind/public_html/index.php on line 352

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Chicago' for 'CDT/-5.0/DST' instead in /home/tonefind/public_html/index.php on line 352

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Chicago' for 'CDT/-5.0/DST' instead in /home/tonefind/public_html/index.php on line 352
Apr 28, 2009
Owner's Notes
The amp is a home-built Marshall 50w clone
This is the
Community Bulletin Board
comments and feedback

1 2
Page 1 of 2

1